High Pass Rate Cisco 200-310 Dumps A Brief Guide to Help All Candidates

Notwithstanding the availability and usability, the greater part of our Designing for Cisco Internet work Solutions 200-310 dumps and study material are made by industry specialists. This is perfect for those hoping to propel their professions with data that is really for all intents and purposes important. We dont use novice creators. Our 200-310 vce have a specific learning of the data that you have to pass your 200-310 exam.

Vendor: Cisco
Certifications: CCDA
Exam Name: Designing for Cisco Internetwork Solutions
Exam Code: 200-310
Total Questions: 295 Q&As
Exam Information:http://www.lead2exam.com/200-310.html
200-310dumps
This 200-310 exam requires a foundation or apprentice knowledge of network design for Cisco enterprise network architectures. CCDA certified professionals can design routed and switched network infrastructures and services involving LAN/WAN technologies for SMB or basic enterprise campus and branch networks.

1.0 Design Methodologies 15%
2.0 Design Objectives 20%
3.0 Addressing and Routing Protocols in an Existing Network 20%
4.0 Enterprise Network Design 20%
5.0 Considerations for Expanding an Existing Network 25%

The Designing for Cisco Internetwork Solutions (DESGN) exam (200-310) is a 75- minute assessment with 55–65 questions that are associated with the Cisco CCDA® Design certification.

QUESTION 11
Refer to the exhibit

200-310dumps

Which layer is the distribution layer?
A. Layer A
B. Layer B
C. Layer C
D. Layers A and B form a consolidated core and distribution layer
Correct Answer: B


QUESTION 12
Refer to the exhibit

200-310dumps

Which configuration can be used to implement FHRP protocol and load balancing at the same time?
A. R1Interface Ethernet0ip address 171.16.6.5 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 2 preemptstandby 2 ip
171.16.6.200standby 2 track serial 0standby 2 priority 95!!R2interface Ethernet0ip address 171.16.6.6 255.255.255.0standby 1 preemptstandby 1 ip
171.16.6.100standby 1 track Serial0standby 1 priority 95standby 2 preemptstandby 2 ip 171.16.6.200standby 2 track serial 0
B. R1Interface Ethernet0ip address 171.16.6.5 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority
95!!R2interface Ethernet0ip address 171.16.6.6 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority 95
C. R1Interface Ethernet0ip address 171.16.6.5 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority 95standby 2
preemptstandby 2 ip 171.16.6.200standby 2 track serial 0standby 2 priority 95!!R2interface Ethernet0ip address 171.16.6.6 255.255.255.0standby 1
preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 2 preemptstandby 2 ip 171.16.6.200standby 2 track serial 0
D. R1Interface Ethernet0ip address 171.16.6.5 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority
95!!R2interface Ethernet0ip address 171.16.6.6 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100
Correct Answer: A


QUESTION 13
What two factors should be considered when deploying an enterprise campus network? (Choose two.)
A. employees
B. geography
C. applications
D. administration
E. throughput
Correct Answer: BC


QUESTION 14
Which network layer is the best fit for security features such as DAI and DHCP snooping?

A. campus core
B. enterprise edge
C. campus distribution
D. remote-access VPN
E. enterprise data center
F. campus access
Correct Answer: F


QUESTION 15
A network engineer requires that an OSPF ASBR must only flood external LSAs only within its own area. What OSPF area type should be configured?
A. Backbone Area
B. Totally Stub Area
C. Not So Stubby Area
D. Stub Area
Correct Answer: C


QUESTION 16
A network engineer requires that an OSPF ASBR must only flood external LSAs only within its own area. What OSPF area type should be configured?
A. Backbone Area
B. Totally Stub Area
C. Not So Stubby Area
D. Stub Area
Correct Answer: C


QUESTION 17
Which protocol is used to reserve bandwidth for the transport of a particular application data flow across the network?
A. cRTP
B. IEEE 802.1P
C. RSVP
D. LFI
E. Auto QOS
Correct Answer: C


QUESTION 18
An enterprise campus module is typically made up of four submodules, as described by the Cisco Enterprise Architecture Model. Which two submodules are part
of this module? (Choose two.)
A. DMZ
B. enterprise branch
C. building distribution
D. server farm/data center
E. MAN
Correct Answer: CD

200-310dumps

The above topics are general guidelines for the content likely to be included on the 200-310 exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the 200-310 dumps and for clarity purposes, the guidelines below may change at any time without notice.

This 200-310 exam requires a foundation or apprentice knowledge of network design for Cisco enterprise network architectures http://www.lead2exam.com/200-310.html CCDA certified professionals can design routed and switched network infrastructures and services involving LAN/WAN technologies for SMB or basic enterprise campus and branch networks.

Advertisements